Upcoming training & events

Thu 27 Nov 2025

8:30 AM - 12:00 PM (3 hours 30 minutes)

This half-day training programme has been developed to meet the needs of Instrument Fitters, Instrument Technicians, and all personnel involved in the maintenance, inspection and repair of equipment plant and machinery with pressure pipework and tubing installed using compression fittings.

Mon 1 Dec 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

1 - 3 Dec 2025

3 days, 8:30 AM - 4:00 PM

This BFPA Accredited training programme has been developed to meet the needs of those involved in the service, maintenance and management of Fluid Power Systems as well as Mechanical Apprentices, Technical Representatives and Project Engineers. This course would also be beneficial to all operators of Fluid Power equipment.

Mon 1 Dec 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

ECITB MJI 10 Hand Torque Bolted Connection Techniques

1 - 3 Dec 2025

3 days, 8:30 AM - 11:30 AM

ECITB MJI 10, 18 & 19 – Hand, Hydraulic Torque and Tension Bolted Connection Techniques

1 - 2 Dec 2025

2 days, 8:30 AM - 11:30 AM

ECITB MJI 10 & 19 – Hand & Hydraulic Torque Bolted Connection Techniques

1 - 3 Dec 2025

3 days, 8:30 AM - 4:00 PM

This course is designed for delegates wishing to become competent in the Banksman & Slinger role in the oil and gas industry.

1 - 5 Dec 2025

1 week, 9:00 AM - 4:00 PM

Stage 1 forms the theoretical basis for offshore crane operations and is aimed at novice crane operators or those operators who require the industry accepted qualification. Stage 2 should follow as soon as possible after stage 1 and is conducted at the trainee’s normal offshore installation.

Mon 1 Dec 2025

12:30 PM - 4:00 PM (3 hours 30 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

2 - 3 Dec 2025

2 days, 8:30 AM - 4:00 PM

This is aimed at personnel who have had previous training and experience in rigging and lifting operations. Delegates will complete the following tasks: 1) Obtain and position the lifting equipment and lifting accessories as detailed in the lifting plan 2) Loft, cross-haul and lower loads 3) Move loads where there are obstruction restricting the direct path of the load e.g. over, under or around pipework.

Fri 5 Dec 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This is a 1 day course which covers the elements listed below in the training content section. On completion of the course the candidate will have received a good basic introduction to Flexible hose assemblies enabling them to work safely with hydraulic hoses and associated connectors which are in use on most pieces of equipment, machinery and plant in every industrial sector.

Fri 5 Dec 2025

12:30 PM - 4:00 PM (3 hours 30 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Mon 8 Dec 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

8 - 11 Dec 2025

4 days, 8:30 AM - 4:00 PM

ECITB Appointed Person Moving Loads introduces the role and responsibilities of the person appointed to oversee, plan or manage lifts or moving loads operations. This 4-day course includes three classroom-based days, which involve theoretical lessons and exercises. Understanding of the theory and techniques covered within the initial three days will then be assessed in a written question and calculations paper, followed by the practical planning and performance of a lift on the final day.

Mon 8 Dec 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

ECITB MJI 10 Hand Torque Bolted Connection Techniques

8 - 10 Dec 2025

3 days, 8:30 AM - 11:30 AM

ECITB MJI 10, 18 & 19 – Hand, Hydraulic Torque and Tension Bolted Connection Techniques

8 - 9 Dec 2025

2 days, 8:30 AM - 11:30 AM

ECITB MJI 10 & 19 – Hand & Hydraulic Torque Bolted Connection Techniques

Mon 8 Dec 2025

12:30 PM - 3:30 PM (3 hours)

This course provides familiarisation training in the safe use of a specific knuckle boom crane type. It is suitable for training personnel who use only this type of crane and is not intended as the basis for general offshore crane operations.