Upcoming training & events

9 - 11 Jun 2025

3 days, 8:30 AM - 4:00 PM

This BFPA Accredited training programme has been developed to meet the needs of those involved in the service, maintenance and management of Fluid Power Systems as well as Mechanical Apprentices, Technical Representatives and Project Engineers. This course would also be beneficial to all operators of Fluid Power equipment.

Thu 12 Jun 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Thu 12 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

The aim of this course is to provide learners with a basic knowledge and understanding of the operation of hydro-pneumatic accumulators and basic practical applications including external visual inspection and pre-charge checks.

Thu 12 Jun 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Fri 13 Jun 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Fri 13 Jun 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

16 - 18 Jun 2025

3 days, 8:30 AM - 4:00 PM

ECITB SBT 01 & 02 - Assemble and Install Small Bore Tubing with Twin Ferrule Fittings / Small Bore Tubing Cone and Threaded Medium & High Pressure

16 - 17 Jun 2025

2 days, 8:30 AM - 4:00 PM

ECITB SBT 01 Assemble and Install Small Bore Tubing with Twin Ferrule Fittings

16 - 18 Jun 2025

3 days, 8:30 AM - 4:00 PM

This course will provide delegates with both theoretical and practical exposure to working with the main electro hydraulic components, with the emphasis on setting up and carrying out systems testing, along with demonstrating the relevant safe working practices.

16 - 20 Jun 2025

1 week, 9:00 AM - 4:00 PM

Stage 1 forms the theoretical basis for offshore crane operations and is aimed at novice crane operators or those operators who require the industry accepted qualification. Stage 2 should follow as soon as possible after stage 1 and is conducted at the trainee’s normal offshore installation.

Wed 18 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

ECITB MJI 10 Hand Torque Bolted Connection Techniques

18 - 20 Jun 2025

3 days, 8:30 AM - 11:30 AM

ECITB MJI 10, 18 & 19 – Hand, Hydraulic Torque and Tension Bolted Connection Techniques

18 - 19 Jun 2025

2 days, 8:30 AM - 11:30 AM

ECITB MJI 10 & 19 – Hand & Hydraulic Torque Bolted Connection Techniques

18 - 19 Jun 2025

2 days, 8:30 AM - 4:00 PM

This course is designed to give Installation Supervisory level personnel in-depth coverage of LOLER 98 Regulations and requirements in order that they might set up controls and systems to implement LOLER requirements.

Thu 19 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This is a 1 day course which covers the elements listed below in the training content section. On completion of the course the candidate will have received a good basic introduction to Flexible hose assemblies enabling them to work safely with hydraulic hoses and associated connectors which are in use on most pieces of equipment, machinery and plant in every industrial sector.

19 - 20 Jun 2025

2 days, 8:30 AM - 4:00 PM

This is a 2 day BFPA accredited and certified course. Attendees will receive tuition in the many techniques and considerations essential for the production of a quality Flexible Hose Assembly and the correct installation methods. Many of these topics will have been referred to in the Foundation Course, and this skills-based course adds to that knowledge by demonstrating and practicing the skill set required to produce and install Flexible hose assemblies to recognised industrial standards.

Thu 19 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

The target group for Competence Assessment is personnel that wish to become certified competent Banksmen & Slingers – having previously completed Banksman & Slinging training, and/or possess sufficient and relevant work experience to be eligible for the Competence assessment.

Fri 20 Jun 2025

8:30 AM - 11:30 AM (3 hours)

This half-day training programme has been developed to meet the needs of Instrument Fitters, Instrument Technicians, and all personnel involved in the maintenance, inspection and repair of equipment plant and machinery with pressure pipework and tubing installed using compression fittings.

Fri 20 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course is aimed at personnel responsible for the issuing and control of lifting equipment from a Rigging Loft onboard an offshore installation, or a shore based workplace. It aims to provide training in the appropriate rigging loft management systems and the in-use inspection requirements of lifting equipment.

Fri 20 Jun 2025

12:30 PM - 4:00 PM (3 hours 30 minutes)

This course provides familiarisation training in the safe use of a specific knuckle boom crane type. It is suitable for training personnel who use only this type of crane and is not intended as the basis for general offshore crane operations.

Fri 20 Jun 2025

12:30 PM - 4:00 PM (3 hours 30 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Fri 20 Jun 2025

12:30 PM - 4:00 PM (3 hours 30 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Fri 20 Jun 2025

12:30 PM - 4:00 PM (3 hours 30 minutes)

This course will provide delegates with a good understanding of fittings and adaptor used in systems comprising Flexible Hose Assemblies. Correct identification and matching of these components is essential to ensure the safety of personnel and maintaining machine/equipment integrity. A hands on approach is taken to ensure that delegates completing the course are aware of the wide range of fittings and adaptors available and the correct methods used for identification.

23 - 24 Jun 2025

2 days, 8:30 AM - 4:00 PM

The aim of this course is to provide learners with a knowledge and understanding of the operation of hydro-pneumatic accumulators. The course will cover theoretical principles and basic practical application including dismantle and rebuild.

23 - 26 Jun 2025

4 days, 8:30 AM - 4:00 PM

ECITB Appointed Person Moving Loads introduces the role and responsibilities of the person appointed to oversee, plan or manage lifts or moving loads operations. This 4-day course includes three classroom-based days, which involve theoretical lessons and exercises. Understanding of the theory and techniques covered within the initial three days will then be assessed in a written question and calculations paper, followed by the practical planning and performance of a lift on the final day.

Mon 23 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

ECITB MJI 10 Hand Torque Bolted Connection Techniques

23 - 25 Jun 2025

3 days, 8:30 AM - 11:30 AM

ECITB MJI 10, 18 & 19 – Hand, Hydraulic Torque and Tension Bolted Connection Techniques

23 - 24 Jun 2025

2 days, 8:30 AM - 11:30 AM

ECITB MJI 10 & 19 – Hand & Hydraulic Torque Bolted Connection Techniques

Mon 23 Jun 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Tue 24 Jun 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Tue 24 Jun 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Thu 26 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

The purpose of this course is to provide basic safe working knowledge in the use of an overhead gantry crane, along with simple slinging practices and a basic knowledge of lifting equipment.

Fri 27 Jun 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Fri 27 Jun 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

The aim of this course is to provide learners with a basic knowledge and understanding of the operation of hydro-pneumatic accumulators and basic practical applications including external visual inspection and pre-charge checks.

Fri 27 Jun 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.