Upcoming training & events

Mon 27 Jan 2025

8:15 AM - 11:00 AM (2 hours 45 minutes)

This course provides familiarisation training in the safe use of a specific knuckle boom crane type. It is suitable for training personnel who use only this type of crane and is not intended as the basis for general offshore crane operations.

Wed 29 Jan 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

The aim of this course is to provide learners with a basic knowledge and understanding of the operation of accumulators. The course will cover theoretical principles and basic practical application.

Thu 30 Jan 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Offshore Crane Operator Stage 2 Reassessment

Thu 30 Jan 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This is a 1 day course which covers the elements listed below in the training content section. On completion of the course the candidate will have received a good basic introduction to Flexible hose assemblies enabling them to work safely with hydraulic hoses and associated connectors which are in use on most pieces of equipment, machinery and plant in every industrial sector.

Thu 30 Jan 2025

8:30 AM - 12:00 PM (3 hours 30 minutes)

This half-day training programme has been developed to meet the needs of Instrument Fitters, Instrument Technicians, and all personnel involved in the maintenance, inspection and repair of equipment plant and machinery with pressure pipework and tubing installed using compression fittings.

Thu 30 Jan 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

The target group for Competence Assessment is personnel that wish to become certified competent Banksmen & Slingers – having previously completed Banksman & Slinging training, and/or possess sufficient and relevant work experience to be eligible for the Competence assessment.

Thu 30 Jan 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Fri 31 Jan 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Fri 31 Jan 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course is aimed at personnel responsible for the issuing and control of lifting equipment from a Rigging Loft onboard an offshore installation, or a shore based workplace. It aims to provide training in the appropriate rigging loft management systems and the in-use inspection requirements of lifting equipment.

Fri 31 Jan 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

3 - 5 Feb 2025

3 days, 8:30 AM - 4:00 PM

This BFPA Accredited training programme has been developed to meet the needs of those involved in the service, maintenance and management of Fluid Power Systems as well as Mechanical Apprentices, Technical Representatives and Project Engineers. This course would also be beneficial to all operators of Fluid Power equipment.

Mon 3 Feb 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Tue 4 Feb 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

4 - 7 Feb 2025

4 days, 8:30 AM - 4:00 PM

ECITB Appointed Person Moving Loads introduces the role and responsibilities of the person appointed to oversee, plan or manage lifts or moving loads operations. This 4-day course includes three classroom-based days, which involve theoretical lessons and exercises. Understanding of the theory and techniques covered within the initial three days will then be assessed in a written question and calculations paper, followed by the practical planning and performance of a lift on the final day.

Tue 4 Feb 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Wed 5 Feb 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Wed 5 Feb 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

ECITB MJI 10 Hand Torque Bolted Connection Techniques

5 - 7 Feb 2025

3 days, 8:30 AM - 11:30 AM

ECITB MJI 10, 18 & 19 – Hand, Hydraulic Torque and Tension Bolted Connection Techniques

5 - 6 Feb 2025

2 days, 8:30 AM - 11:30 AM

ECITB MJI 10 & 19 – Hand & Hydraulic Torque Bolted Connection Techniques

Thu 6 Feb 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

6 - 7 Feb 2025

2 days, 8:30 AM - 4:00 PM

This is aimed at personnel who have had previous training and experience in rigging and lifting operations. Delegates will complete the following tasks: 1) Obtain and position the lifting equipment and lifting accessories as detailed in the lifting plan 2) Loft, cross-haul and lower loads 3) Move loads where there are obstruction restricting the direct path of the load e.g. over, under or around pipework.

Fri 7 Feb 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Fri 7 Feb 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

10 - 11 Feb 2025

2 days, 8:30 AM - 4:00 PM

This is a 2 day BFPA accredited and certified course. Attendees will receive tuition in the many techniques and considerations essential for the production of a quality Flexible Hose Assembly and the correct installation methods. Many of these topics will have been referred to in the Foundation Course, and this skills-based course adds to that knowledge by demonstrating and practicing the skill set required to produce and install Flexible hose assemblies to recognised industrial standards.

10 - 12 Feb 2025

3 days, 8:30 AM - 4:00 PM

This BFPA Accredited training programme has been developed to meet the needs of those involved in the service, maintenance and management of Fluid Power Systems as well as Mechanical Apprentices, Technical Representatives and Project Engineers. This course would also be beneficial to all operators of Fluid Power equipment.

Tue 11 Feb 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Wed 12 Feb 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Wed 12 Feb 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This is a 1 day course which covers the elements listed below in the training content section. On completion of the course the candidate will have received a good basic introduction to Flexible hose assemblies enabling them to work safely with hydraulic hoses and associated connectors which are in use on most pieces of equipment, machinery and plant in every industrial sector.

Wed 12 Feb 2025

12:30 PM - 4:00 PM (3 hours 30 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Thu 13 Feb 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Thu 13 Feb 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

The target group for Competence Assessment is personnel that wish to become certified competent Banksmen & Slingers – having previously completed Banksman & Slinging training, and/or possess sufficient and relevant work experience to be eligible for the Competence assessment.

Thu 13 Feb 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Fri 14 Feb 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Fri 14 Feb 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course is aimed at personnel responsible for the issuing and control of lifting equipment from a Rigging Loft onboard an offshore installation, or a shore based workplace. It aims to provide training in the appropriate rigging loft management systems and the in-use inspection requirements of lifting equipment.

Fri 14 Feb 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Mon 17 Feb 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

17 - 19 Feb 2025

3 days, 8:30 AM - 4:00 PM

This course will provide delegates with both theoretical and practical exposure to working with the main electro hydraulic components, with the emphasis on setting up and carrying out systems testing, along with demonstrating the relevant safe working practices.

Mon 17 Feb 2025

12:30 PM - 4:00 PM (3 hours 30 minutes)

This course provides familiarisation training in the safe use of a specific knuckle boom crane type. It is suitable for training personnel who use only this type of crane and is not intended as the basis for general offshore crane operations.

Mon 17 Feb 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Tue 18 Feb 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

18 - 20 Feb 2025

3 days, 8:30 AM - 4:00 PM

The aim and objectives are to provide the delegate with knowledge of the rigging principles, general hazards and risks of rigging and lifting operations, an awareness of relevant legislation and regulation, and an opportunity to practice basic rigging operations following a lifting plan. Delegate performance in practical exercises will be evaluated against learning outcomes where delegates will be required to demonstrate various rigging tasks.

Tue 18 Feb 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Wed 19 Feb 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Wed 19 Feb 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This is a 1 day course which covers the elements listed below in the training content section. On completion of the course the candidate will have received a good basic introduction to Flexible hose assemblies enabling them to work safely with hydraulic hoses and associated connectors which are in use on most pieces of equipment, machinery and plant in every industrial sector.

Wed 19 Feb 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

ECITB MJI 10 Hand Torque Bolted Connection Techniques

19 - 21 Feb 2025

3 days, 8:30 AM - 11:30 AM

ECITB MJI 10, 18 & 19 – Hand, Hydraulic Torque and Tension Bolted Connection Techniques

19 - 20 Feb 2025

2 days, 8:30 AM - 11:30 AM

ECITB MJI 10 & 19 – Hand & Hydraulic Torque Bolted Connection Techniques

19 - 21 Feb 2025

3 days, 8:30 AM - 4:00 PM

ECITB SBT 01 & 02 - Assemble and Install Small Bore Tubing with Twin Ferrule Fittings / Small Bore Tubing Cone and Threaded Medium & High Pressure

Wed 19 Feb 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

20 - 21 Feb 2025

2 days, 8:30 AM - 4:00 PM

This is a 2 day BFPA accredited and certified course. Attendees will receive tuition in the many techniques and considerations essential for the production of a quality Flexible Hose Assembly and the correct installation methods. Many of these topics will have been referred to in the Foundation Course, and this skills-based course adds to that knowledge by demonstrating and practicing the skill set required to produce and install Flexible hose assemblies to recognised industrial standards.

Thu 20 Feb 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Fri 21 Feb 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Fri 21 Feb 2025

12:30 PM - 4:00 PM (3 hours 30 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Mon 24 Feb 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Mon 24 Feb 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

ECITB MJI 10 Hand Torque Bolted Connection Techniques

24 - 25 Feb 2025

2 days, 8:30 AM - 11:30 AM

ECITB MJI 10 & 19 – Hand & Hydraulic Torque Bolted Connection Techniques

24 - 25 Feb 2025

2 days, 8:30 AM - 4:00 PM

This is aimed at personnel who have had previous training and experience in rigging and lifting operations. Delegates will complete the following tasks: 1) Obtain and position the lifting equipment and lifting accessories as detailed in the lifting plan 2) Loft, cross-haul and lower loads 3) Move loads where there are obstruction restricting the direct path of the load e.g. over, under or around pipework.

Mon 24 Feb 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Tue 25 Feb 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Tue 25 Feb 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Wed 26 Feb 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Wed 26 Feb 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This is a 1 day course which covers the elements listed below in the training content section. On completion of the course the candidate will have received a good basic introduction to Flexible hose assemblies enabling them to work safely with hydraulic hoses and associated connectors which are in use on most pieces of equipment, machinery and plant in every industrial sector.

26 - 28 Feb 2025

3 days, 8:30 AM - 4:00 PM

This course is designed for delegates wishing to become competent in the Banksman & Slinger role in the oil and gas industry.

Wed 26 Feb 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Thu 27 Feb 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

27 - 28 Feb 2025

2 days, 8:30 AM - 4:00 PM

This is a 2 day BFPA accredited and certified course. Attendees will receive tuition in the many techniques and considerations essential for the production of a quality Flexible Hose Assembly and the correct installation methods. Many of these topics will have been referred to in the Foundation Course, and this skills-based course adds to that knowledge by demonstrating and practicing the skill set required to produce and install Flexible hose assemblies to recognised industrial standards.

Thu 27 Feb 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Fri 28 Feb 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Fri 28 Feb 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

The target group for Competence Assessment is personnel that wish to become certified competent Banksmen & Slingers – having previously completed Banksman & Slinging training, and/or possess sufficient and relevant work experience to be eligible for the Competence assessment.

Fri 28 Feb 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Mon 3 Mar 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Mon 3 Mar 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

ECITB MJI 10 Hand Torque Bolted Connection Techniques

3 - 5 Mar 2025

3 days, 8:30 AM - 12:30 PM

ECITB MJI 10, 18 & 19 – Hand, Hydraulic Torque and Tension Bolted Connection Techniques

3 - 4 Mar 2025

2 days, 8:30 AM - 12:30 PM

ECITB MJI 10 & 19 – Hand & Hydraulic Torque Bolted Connection Techniques

3 - 5 Mar 2025

3 days, 8:30 AM - 4:00 PM

ECITB SBT 01 & 02 - Assemble and Install Small Bore Tubing with Twin Ferrule Fittings / Small Bore Tubing Cone and Threaded Medium & High Pressure

3 - 4 Mar 2025

2 days, 8:30 AM - 4:00 PM

ECITB SBT 01 Assemble and Install Small Bore Tubing with Twin Ferrule Fittings

Mon 3 Mar 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Tue 4 Mar 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

4 - 5 Mar 2025

2 days, 8:30 AM - 4:00 PM

This is a 2 day BFPA accredited and certified course. Attendees will receive tuition in the many techniques and considerations essential for the production of a quality Flexible Hose Assembly and the correct installation methods. Many of these topics will have been referred to in the Foundation Course, and this skills-based course adds to that knowledge by demonstrating and practicing the skill set required to produce and install Flexible hose assemblies to recognised industrial standards.

4 - 7 Mar 2025

4 days, 8:30 AM - 4:00 PM

ECITB Appointed Person Moving Loads introduces the role and responsibilities of the person appointed to oversee, plan or manage lifts or moving loads operations. This 4-day course includes three classroom-based days, which involve theoretical lessons and exercises. Understanding of the theory and techniques covered within the initial three days will then be assessed in a written question and calculations paper, followed by the practical planning and performance of a lift on the final day.

Tue 4 Mar 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Wed 5 Mar 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Wed 5 Mar 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Thu 6 Mar 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Thu 6 Mar 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This is a 1 day course which covers the elements listed below in the training content section. On completion of the course the candidate will have received a good basic introduction to Flexible hose assemblies enabling them to work safely with hydraulic hoses and associated connectors which are in use on most pieces of equipment, machinery and plant in every industrial sector.

Thu 6 Mar 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Fri 7 Mar 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Fri 7 Mar 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Mon 10 Mar 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

10 - 12 Mar 2025

3 days, 8:30 AM - 4:00 PM

This BFPA Accredited training programme has been developed to meet the needs of those involved in the service, maintenance and management of Fluid Power Systems as well as Mechanical Apprentices, Technical Representatives and Project Engineers. This course would also be beneficial to all operators of Fluid Power equipment.

Mon 10 Mar 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

ECITB MJI 10 Hand Torque Bolted Connection Techniques

10 - 12 Mar 2025

3 days, 8:30 AM - 11:30 AM

ECITB MJI 10, 18 & 19 – Hand, Hydraulic Torque and Tension Bolted Connection Techniques

10 - 11 Mar 2025

2 days, 8:30 AM - 11:30 AM

ECITB MJI 10 & 19 – Hand & Hydraulic Torque Bolted Connection Techniques

10 - 12 Mar 2025

3 days, 8:30 AM - 4:00 PM

ECITB SBT 01 & 02 - Assemble and Install Small Bore Tubing with Twin Ferrule Fittings / Small Bore Tubing Cone and Threaded Medium & High Pressure

10 - 11 Mar 2025

2 days, 8:30 AM - 4:00 PM

ECITB SBT 01 Assemble and Install Small Bore Tubing with Twin Ferrule Fittings

10 - 12 Mar 2025

3 days, 8:30 AM - 4:00 PM

The aim and objectives are to provide the delegate with knowledge of the rigging principles, general hazards and risks of rigging and lifting operations, an awareness of relevant legislation and regulation, and an opportunity to practice basic rigging operations following a lifting plan. Delegate performance in practical exercises will be evaluated against learning outcomes where delegates will be required to demonstrate various rigging tasks.

Mon 10 Mar 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Tue 11 Mar 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

11 - 12 Mar 2025

2 days, 8:30 AM - 4:00 PM

The aim of the OPITO LCP Assessment and LCP Re-assessment is to establish that learners have the required underpinning knowledge, understanding and practical skills to undertake the role as a LOLER Competent Person/ LOLER Focal Point at the workplace. To successfully complete these assessments learners must be able to read and write in English.

Tue 11 Mar 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Wed 12 Mar 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Wed 12 Mar 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Thu 13 Mar 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Thu 13 Mar 2025

8:30 AM - 12:00 PM (3 hours 30 minutes)

This half-day training programme has been developed to meet the needs of Instrument Fitters, Instrument Technicians, and all personnel involved in the maintenance, inspection and repair of equipment plant and machinery with pressure pipework and tubing installed using compression fittings.

Thu 13 Mar 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

The target group for Competence Assessment is personnel that wish to become certified competent Banksmen & Slingers – having previously completed Banksman & Slinging training, and/or possess sufficient and relevant work experience to be eligible for the Competence assessment.

13 - 14 Mar 2025

2 days, 8:30 AM - 4:00 PM

This is aimed at personnel who have had previous training and experience in rigging and lifting operations. Delegates will complete the following tasks: 1) Obtain and position the lifting equipment and lifting accessories as detailed in the lifting plan 2) Loft, cross-haul and lower loads 3) Move loads where there are obstruction restricting the direct path of the load e.g. over, under or around pipework.

Thu 13 Mar 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Thu 13 Mar 2025

12:30 PM - 4:00 PM (3 hours 30 minutes)

This course will provide delegates with a good understanding of fittings and adaptor used in systems comprising Flexible Hose Assemblies. Correct identification and matching of these components is essential to ensure the safety of personnel and maintaining machine/equipment integrity. A hands on approach is taken to ensure that delegates completing the course are aware of the wide range of fittings and adaptors available and the correct methods used for identification.

Fri 14 Mar 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Fri 14 Mar 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course is aimed at personnel responsible for the issuing and control of lifting equipment from a Rigging Loft onboard an offshore installation, or a shore based workplace. It aims to provide training in the appropriate rigging loft management systems and the in-use inspection requirements of lifting equipment.

Fri 14 Mar 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Mon 17 Mar 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Mon 17 Mar 2025

8:30 AM - 12:30 PM (4 hours)

This half-day training programme has been developed to meet the needs of Instrument Fitters, Instrument Technicians, and all personnel involved in the maintenance, inspection and repair of equipment plant and machinery with pressure pipework and tubing installed using compression fittings.

Mon 17 Mar 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

ECITB MJI 10 Hand Torque Bolted Connection Techniques

17 - 19 Mar 2025

3 days, 8:30 AM - 11:30 AM

ECITB MJI 10, 18 & 19 – Hand, Hydraulic Torque and Tension Bolted Connection Techniques

17 - 18 Mar 2025

2 days, 8:30 AM - 11:30 AM

ECITB MJI 10 & 19 – Hand & Hydraulic Torque Bolted Connection Techniques

17 - 19 Mar 2025

3 days, 8:30 AM - 4:00 PM

This course will provide delegates with both theoretical and practical exposure to working with the main electro hydraulic components, with the emphasis on setting up and carrying out systems testing, along with demonstrating the relevant safe working practices.

17 - 21 Mar 2025

1 week, 9:00 AM - 4:00 PM

Stage 1 forms the theoretical basis for offshore crane operations and is aimed at novice crane operators or those operators who require the industry accepted qualification. Stage 2 should follow as soon as possible after stage 1 and is conducted at the trainee’s normal offshore installation.

Mon 17 Mar 2025

12:30 PM - 4:00 PM (3 hours 30 minutes)

This course will provide delegates with a good understanding of fittings and adaptor used in systems comprising Flexible Hose Assemblies. Correct identification and matching of these components is essential to ensure the safety of personnel and maintaining machine/equipment integrity. A hands on approach is taken to ensure that delegates completing the course are aware of the wide range of fittings and adaptors available and the correct methods used for identification.

Tue 18 Mar 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This is a 1 day course which covers the elements listed below in the training content section. On completion of the course the candidate will have received a good basic introduction to Flexible hose assemblies enabling them to work safely with hydraulic hoses and associated connectors which are in use on most pieces of equipment, machinery and plant in every industrial sector.

18 - 21 Mar 2025

4 days, 8:30 AM - 4:00 PM

ECITB Appointed Person Moving Loads introduces the role and responsibilities of the person appointed to oversee, plan or manage lifts or moving loads operations. This 4-day course includes three classroom-based days, which involve theoretical lessons and exercises. Understanding of the theory and techniques covered within the initial three days will then be assessed in a written question and calculations paper, followed by the practical planning and performance of a lift on the final day.

19 - 21 Mar 2025

3 days, 8:30 AM - 4:00 PM

ECITB SBT 01 & 02 - Assemble and Install Small Bore Tubing with Twin Ferrule Fittings / Small Bore Tubing Cone and Threaded Medium & High Pressure

19 - 20 Mar 2025

2 days, 8:30 AM - 4:00 PM

ECITB SBT 01 Assemble and Install Small Bore Tubing with Twin Ferrule Fittings

20 - 21 Mar 2025

2 days, 8:30 AM - 4:00 PM

This is a 2 day BFPA accredited and certified course. Attendees will receive tuition in the many techniques and considerations essential for the production of a quality Flexible Hose Assembly and the correct installation methods. Many of these topics will have been referred to in the Foundation Course, and this skills-based course adds to that knowledge by demonstrating and practicing the skill set required to produce and install Flexible hose assemblies to recognised industrial standards.

Fri 21 Mar 2025

12:30 PM - 4:00 PM (3 hours 30 minutes)

This course provides familiarisation training in the safe use of a specific knuckle boom crane type. It is suitable for training personnel who use only this type of crane and is not intended as the basis for general offshore crane operations.

Fri 21 Mar 2025

12:30 PM - 4:00 PM (3 hours 30 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Mon 24 Mar 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Mon 24 Mar 2025

8:30 AM - 12:00 PM (3 hours 30 minutes)

This half-day training programme has been developed to meet the needs of Instrument Fitters, Instrument Technicians, and all personnel involved in the maintenance, inspection and repair of equipment plant and machinery with pressure pipework and tubing installed using compression fittings.

Mon 24 Mar 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Mon 24 Mar 2025

12:30 PM - 4:00 PM (3 hours 30 minutes)

This course will provide delegates with a good understanding of fittings and adaptor used in systems comprising Flexible Hose Assemblies. Correct identification and matching of these components is essential to ensure the safety of personnel and maintaining machine/equipment integrity. A hands on approach is taken to ensure that delegates completing the course are aware of the wide range of fittings and adaptors available and the correct methods used for identification.

Tue 25 Mar 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

25 - 26 Mar 2025

2 days, 8:30 AM - 4:00 PM

This is a 2 day BFPA accredited and certified course. Attendees will receive tuition in the many techniques and considerations essential for the production of a quality Flexible Hose Assembly and the correct installation methods. Many of these topics will have been referred to in the Foundation Course, and this skills-based course adds to that knowledge by demonstrating and practicing the skill set required to produce and install Flexible hose assemblies to recognised industrial standards.

25 - 26 Mar 2025

2 days, 8:30 AM - 4:00 PM

The aim of the OPITO LCP Assessment and LCP Re-assessment is to establish that learners have the required underpinning knowledge, understanding and practical skills to undertake the role as a LOLER Competent Person/ LOLER Focal Point at the workplace. To successfully complete these assessments learners must be able to read and write in English.

Tue 25 Mar 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Wed 26 Mar 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Wed 26 Mar 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

ECITB MJI 10 Hand Torque Bolted Connection Techniques

26 - 28 Mar 2025

3 days, 8:30 AM - 11:30 AM

ECITB MJI 10, 18 & 19 – Hand, Hydraulic Torque and Tension Bolted Connection Techniques

26 - 27 Mar 2025

2 days, 8:30 AM - 11:30 AM

ECITB MJI 10 & 19 – Hand & Hydraulic Torque Bolted Connection Techniques

Wed 26 Mar 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Thu 27 Mar 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Thu 27 Mar 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Fri 28 Mar 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Fri 28 Mar 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

31 Mar 2025 - 2 Apr 2025

3 days, 8:00 AM - 12:30 PM

ECITB MJI 10, 18 & 19 – Hand, Hydraulic Torque and Tension Bolted Connection Techniques

Mon 31 Mar 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

31 Mar 2025 - 2 Apr 2025

3 days, 8:30 AM - 4:00 PM

This BFPA Accredited training programme has been developed to meet the needs of those involved in the service, maintenance and management of Fluid Power Systems as well as Mechanical Apprentices, Technical Representatives and Project Engineers. This course would also be beneficial to all operators of Fluid Power equipment.

31 Mar 2025 - 3 Apr 2025

4 days, 8:30 AM - 4:00 PM

ECITB Appointed Person Moving Loads introduces the role and responsibilities of the person appointed to oversee, plan or manage lifts or moving loads operations. This 4-day course includes three classroom-based days, which involve theoretical lessons and exercises. Understanding of the theory and techniques covered within the initial three days will then be assessed in a written question and calculations paper, followed by the practical planning and performance of a lift on the final day.

Mon 31 Mar 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

ECITB MJI 10 Hand Torque Bolted Connection Techniques

31 Mar 2025 - 1 Apr 2025

2 days, 8:30 AM - 4:00 PM

ECITB MJI 10 & 19 – Hand & Hydraulic Torque Bolted Connection Techniques

31 Mar 2025 - 2 Apr 2025

3 days, 8:30 AM - 4:00 PM

ECITB SBT 01 & 02 - Assemble and Install Small Bore Tubing with Twin Ferrule Fittings / Small Bore Tubing Cone and Threaded Medium & High Pressure

31 Mar 2025 - 1 Apr 2025

2 days, 8:30 AM - 4:00 PM

ECITB SBT 01 Assemble and Install Small Bore Tubing with Twin Ferrule Fittings

31 Mar 2025 - 2 Apr 2025

3 days, 8:30 AM - 4:00 PM

This course is designed for delegates wishing to become competent in the Banksman & Slinger role in the oil and gas industry.

Mon 31 Mar 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Tue 1 Apr 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Tue 1 Apr 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Wed 2 Apr 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Wed 2 Apr 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

The target group for Competence Assessment is personnel that wish to become certified competent Banksmen & Slingers – having previously completed Banksman & Slinging training, and/or possess sufficient and relevant work experience to be eligible for the Competence assessment.

Wed 2 Apr 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Thu 3 Apr 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

3 - 4 Apr 2025

2 days, 8:30 AM - 4:00 PM

This is a 2 day BFPA accredited and certified course. Attendees will receive tuition in the many techniques and considerations essential for the production of a quality Flexible Hose Assembly and the correct installation methods. Many of these topics will have been referred to in the Foundation Course, and this skills-based course adds to that knowledge by demonstrating and practicing the skill set required to produce and install Flexible hose assemblies to recognised industrial standards.

Thu 3 Apr 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

ECITB MJI 18 – Hydraulic Tension Bolted Connection Techniques