Upcoming training & events

Wed 15 Oct 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This is a 1 day course which covers the elements listed below in the training content section. On completion of the course the candidate will have received a good basic introduction to Flexible hose assemblies enabling them to work safely with hydraulic hoses and associated connectors which are in use on most pieces of equipment, machinery and plant in every industrial sector.

Wed 15 Oct 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

The target group for Competence Assessment is personnel that wish to become certified competent Banksmen & Slingers – having previously completed Banksman & Slinging training, and/or possess sufficient and relevant work experience to be eligible for the Competence assessment.

Thu 16 Oct 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

The aim of this course is to provide learners with a basic knowledge and understanding of the operation of hydro-pneumatic accumulators and basic practical applications including external visual inspection and pre-charge checks.

Thu 16 Oct 2025

8:30 AM - 12:00 PM (3 hours 30 minutes)

This half-day training programme has been developed to meet the needs of Instrument Fitters, Instrument Technicians, and all personnel involved in the maintenance, inspection and repair of equipment plant and machinery with pressure pipework and tubing installed using compression fittings.

16 - 17 Oct 2025

2 days, 8:30 AM - 4:00 PM

This is aimed at personnel who have had previous training and experience in rigging and lifting operations. Delegates will complete the following tasks: 1) Obtain and position the lifting equipment and lifting accessories as detailed in the lifting plan 2) Loft, cross-haul and lower loads 3) Move loads where there are obstruction restricting the direct path of the load e.g. over, under or around pipework.

Thu 16 Oct 2025

12:30 PM - 4:00 PM (3 hours 30 minutes)

This course will provide delegates with a good understanding of fittings and adaptor used in systems comprising Flexible Hose Assemblies. Correct identification and matching of these components is essential to ensure the safety of personnel and maintaining machine/equipment integrity. A hands on approach is taken to ensure that delegates completing the course are aware of the wide range of fittings and adaptors available and the correct methods used for identification.

Mon 20 Oct 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

The aim of this course is to provide learners with a basic knowledge and understanding of the operation of hydro-pneumatic accumulators and basic practical applications including external visual inspection and pre-charge checks.

Mon 20 Oct 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

ECITB MJI 10 Hand Torque Bolted Connection Techniques

20 - 22 Oct 2025

3 days, 8:30 AM - 11:30 AM

ECITB MJI 10, 18 & 19 – Hand, Hydraulic Torque and Tension Bolted Connection Techniques

20 - 21 Oct 2025

2 days, 8:30 AM - 11:30 AM

ECITB MJI 10 & 19 – Hand & Hydraulic Torque Bolted Connection Techniques

20 - 22 Oct 2025

3 days, 8:30 AM - 4:00 PM

ECITB SBT 01 & 02 - Assemble and Install Small Bore Tubing with Twin Ferrule Fittings / Small Bore Tubing Cone and Threaded Medium & High Pressure

20 - 21 Oct 2025

2 days, 8:30 AM - 4:00 PM

ECITB SBT 01 Assemble and Install Small Bore Tubing with Twin Ferrule Fittings

20 - 21 Oct 2025

2 days, 8:30 AM - 4:00 PM

The aim of the OPITO LCP Assessment and LCP Re-assessment is to establish that learners have the required underpinning knowledge, understanding and practical skills to undertake the role as a LOLER Competent Person/ LOLER Focal Point at the workplace. To successfully complete these assessments learners must be able to read and write in English.

20 - 22 Oct 2025

3 days, 9:00 AM - 4:00 PM

This course is suitable for personnel who have completed the offshore crane operator standard stage 1 or equivalent standard, or personnel who hold verifiable evidence to demonstrate that they have been operating cranes.

Wed 22 Oct 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

The purpose of this course is to provide basic safe working knowledge in the use of an overhead gantry crane, along with simple slinging practices and a basic knowledge of lifting equipment.

Wed 22 Oct 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Thu 23 Oct 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

23 - 24 Oct 2025

2 days, 8:30 AM - 4:00 PM

This is a 2 day BFPA accredited and certified course. Attendees will receive tuition in the many techniques and considerations essential for the production of a quality Flexible Hose Assembly and the correct installation methods. Many of these topics will have been referred to in the Foundation Course, and this skills-based course adds to that knowledge by demonstrating and practicing the skill set required to produce and install Flexible hose assemblies to recognised industrial standards.

Thu 23 Oct 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This course is aimed at personnel responsible for the issuing and control of lifting equipment from a Rigging Loft onboard an offshore installation, or a shore based workplace. It aims to provide training in the appropriate rigging loft management systems and the in-use inspection requirements of lifting equipment.

Thu 23 Oct 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Fri 24 Oct 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Fri 24 Oct 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Mon 27 Oct 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

27 - 29 Oct 2025

3 days, 8:30 AM - 4:00 PM

This BFPA Accredited training programme has been developed to meet the needs of those involved in the service, maintenance and management of Fluid Power Systems as well as Mechanical Apprentices, Technical Representatives and Project Engineers. This course would also be beneficial to all operators of Fluid Power equipment.

27 - 30 Oct 2025

4 days, 8:30 AM - 4:00 PM

ECITB Appointed Person Moving Loads introduces the role and responsibilities of the person appointed to oversee, plan or manage lifts or moving loads operations. This 4-day course includes three classroom-based days, which involve theoretical lessons and exercises. Understanding of the theory and techniques covered within the initial three days will then be assessed in a written question and calculations paper, followed by the practical planning and performance of a lift on the final day.

27 - 29 Oct 2025

3 days, 8:30 AM - 4:00 PM

ECITB SBT 01 & 02 - Assemble and Install Small Bore Tubing with Twin Ferrule Fittings / Small Bore Tubing Cone and Threaded Medium & High Pressure

27 - 28 Oct 2025

2 days, 8:30 AM - 4:00 PM

ECITB SBT 01 Assemble and Install Small Bore Tubing with Twin Ferrule Fittings

27 - 29 Oct 2025

3 days, 8:30 AM - 4:00 PM

The aim and objectives are to provide the delegate with knowledge of the rigging principles, general hazards and risks of rigging and lifting operations, an awareness of relevant legislation and regulation, and an opportunity to practice basic rigging operations following a lifting plan. Delegate performance in practical exercises will be evaluated against learning outcomes where delegates will be required to demonstrate various rigging tasks.

Mon 27 Oct 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Tue 28 Oct 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Tue 28 Oct 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Wed 29 Oct 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Thu 30 Oct 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

30 - 31 Oct 2025

2 days, 8:30 AM - 4:00 PM

This is a 2 day BFPA accredited and certified course. Attendees will receive tuition in the many techniques and considerations essential for the production of a quality Flexible Hose Assembly and the correct installation methods. Many of these topics will have been referred to in the Foundation Course, and this skills-based course adds to that knowledge by demonstrating and practicing the skill set required to produce and install Flexible hose assemblies to recognised industrial standards.

Thu 30 Oct 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Fri 31 Oct 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Fri 31 Oct 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Mon 3 Nov 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Mon 3 Nov 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

ECITB MJI 10 Hand Torque Bolted Connection Techniques

3 - 5 Nov 2025

3 days, 8:30 AM - 11:30 AM

ECITB MJI 10, 18 & 19 – Hand, Hydraulic Torque and Tension Bolted Connection Techniques

3 - 4 Nov 2025

2 days, 8:30 AM - 11:30 AM

ECITB MJI 10 & 19 – Hand & Hydraulic Torque Bolted Connection Techniques

3 - 5 Nov 2025

3 days, 8:30 AM - 4:00 PM

ECITB SBT 01 & 02 - Assemble and Install Small Bore Tubing with Twin Ferrule Fittings / Small Bore Tubing Cone and Threaded Medium & High Pressure

3 - 4 Nov 2025

2 days, 8:30 AM - 4:00 PM

ECITB SBT 01 Assemble and Install Small Bore Tubing with Twin Ferrule Fittings

Mon 3 Nov 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

The purpose of this course is to provide basic safe working knowledge in the use of an overhead gantry crane, along with simple slinging practices and a basic knowledge of lifting equipment.

Mon 3 Nov 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Tue 4 Nov 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Tue 4 Nov 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This BFPA course is classroom based and covers all aspects of hose management including hose assembly identity, inspection, creating records i.e. hose registers and inspection checklists, Risk analysis and Competence assurance. Candidates will be assessed on each of the topics covered. Certification is graded; Pass Merit or distinction

Tue 4 Nov 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Wed 5 Nov 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

5 - 7 Nov 2025

3 days, 8:30 AM - 4:00 PM

This course will provide delegates with both theoretical and practical exposure to working with the main electro hydraulic components, with the emphasis on setting up and carrying out systems testing, along with demonstrating the relevant safe working practices.

Wed 5 Nov 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

The target group for Competence Assessment is personnel that wish to become certified competent Banksmen & Slingers – having previously completed Banksman & Slinging training, and/or possess sufficient and relevant work experience to be eligible for the Competence assessment.

Wed 5 Nov 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Thu 6 Nov 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Thu 6 Nov 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

This is a 1 day course which covers the elements listed below in the training content section. On completion of the course the candidate will have received a good basic introduction to Flexible hose assemblies enabling them to work safely with hydraulic hoses and associated connectors which are in use on most pieces of equipment, machinery and plant in every industrial sector.

Thu 6 Nov 2025

8:30 AM - 12:00 PM (3 hours 30 minutes)

This half-day training programme has been developed to meet the needs of Instrument Fitters, Instrument Technicians, and all personnel involved in the maintenance, inspection and repair of equipment plant and machinery with pressure pipework and tubing installed using compression fittings.

6 - 7 Nov 2025

2 days, 8:30 AM - 4:00 PM

This is aimed at personnel who have had previous training and experience in rigging and lifting operations. Delegates will complete the following tasks: 1) Obtain and position the lifting equipment and lifting accessories as detailed in the lifting plan 2) Loft, cross-haul and lower loads 3) Move loads where there are obstruction restricting the direct path of the load e.g. over, under or around pipework.

Thu 6 Nov 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Thu 6 Nov 2025

12:30 PM - 4:00 PM (3 hours 30 minutes)

This course will provide delegates with a good understanding of fittings and adaptor used in systems comprising Flexible Hose Assemblies. Correct identification and matching of these components is essential to ensure the safety of personnel and maintaining machine/equipment integrity. A hands on approach is taken to ensure that delegates completing the course are aware of the wide range of fittings and adaptors available and the correct methods used for identification.

Fri 7 Nov 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Fri 7 Nov 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Mon 10 Nov 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

10 - 11 Nov 2025

2 days, 8:30 AM - 4:00 PM

This is a 2 day BFPA accredited and certified course. Attendees will receive tuition in the many techniques and considerations essential for the production of a quality Flexible Hose Assembly and the correct installation methods. Many of these topics will have been referred to in the Foundation Course, and this skills-based course adds to that knowledge by demonstrating and practicing the skill set required to produce and install Flexible hose assemblies to recognised industrial standards.

Mon 10 Nov 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

ECITB MJI 10 Hand Torque Bolted Connection Techniques

10 - 12 Nov 2025

3 days, 8:30 AM - 11:30 AM

ECITB MJI 10, 18 & 19 – Hand, Hydraulic Torque and Tension Bolted Connection Techniques

10 - 11 Nov 2025

2 days, 8:30 AM - 11:30 AM

ECITB MJI 10 & 19 – Hand & Hydraulic Torque Bolted Connection Techniques

Mon 10 Nov 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Wed 12 Nov 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Wed 12 Nov 2025

12:30 PM - 3:30 PM (3 hours)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

Thu 13 Nov 2025

8:15 AM - 11:30 AM (3 hours 15 minutes)

Operators will be assessed to their current stage 3 carrying out routine crane maintenance operations, performing various practical exercised and/ or observed carrying out normal offshore crane operations. In addition to normal operation, Operators will be expected to correctly demonstrate emergency response procedures as well as their competence to operate during a range of conditions.

13 - 14 Nov 2025

2 days, 8:30 AM - 4:00 PM

The aim of this course is to provide learners with a knowledge and understanding of the operation of hydro-pneumatic accumulators. The course will cover theoretical principles and basic practical application including dismantle and rebuild.

Thu 13 Nov 2025

8:30 AM - 4:00 PM (7 hours 30 minutes)

The purpose of this course is to provide basic safe working knowledge in the use of an overhead gantry crane, along with simple slinging practices and a basic knowledge of lifting equipment.